Before Use; Important; Volume Setting; How To Read This Manual - Kenwood KDC-BT950DAB Mode D'emploi

Before Use

IMPORTANT

• To ensure proper use, please read through this manual before using this
product. It is especially important that you read and observe Warnings and
Cautions in this manual.
• Please keep the manual in a safe and accessible place for future reference.
WARNING
• Do not operate any function that takes your attention away from safe
driving.
CAUTION

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent
accidents.
• Lower the volume before playing digital sources to avoid damaging the
speakers by the sudden increase of the output level.
General:
• Avoid using the external device if it might hinder safe driving.
• Make sure all important data has been backed up. We shall bear no
responsibility for any loss of recorded data.
• Never put or leave any metallic objects (such as coins or metal tools) inside
the unit to prevent a short circuit.
• For /
condensation on the laser lens, eject the disc and wait for the moisture to
evaporate.
• USB rating is indicated on the main unit. To view, detach the faceplate.
(Page 4)
• Depending on the types of cars, the antenna will automatically extend
when you turn on the unit with the antenna control wire connected
(page 33). Turn off the unit or change the source to STANDBY when
parking at a low ceiling area.
: If a disc error occurs due to

How to read this manual

• The displays and faceplates shown in this manual are examples used to
provide clear explanations of the operations. For this reason, they may
be different from the actual displays or faceplates.
• Operations are explained mainly using buttons on the faceplate of
.
• English indications are used for the purpose of explanation. You can
select the display language from the [FUNCTION] menu. (Page 7)
• [XX] indicates the selected items.
• (Page XX) indicates references are available on the stated page.
This symbol on the product means there are important
operating and maintenance instructions in this manual.
Be sure to carefully read instructions in this manual.
For :
Muting upon the reception of a phone call
Connect the MUTE wire to your telephone using a commercial
telephone accessory. (Page 33)
• When a call comes in, "CALL" appears. (The audio system pauses.)
– To continue listening to the audio system during a call, press
B SRC. "CALL" disappears and the audio system resumes.
• When the call ends, "CALL" disappears. (The audio system resumes.)
3
ENGLISH