Audio Settings - Kenwood KDC-BT950DAB Mode D'emploi

Audio Settings

Select the equalizer
(for
Press repeatedly to select a preset equalizer (which is suitable to the
music genre) directly.
Preset equalizer: [NATURAL]/[ROCK]/[POPS]/[EASY]/[TOP40]/[JAZZ]/[POWERFUL]/
[USER]
• Select [USER] to use the settings made in [EASY EQ] or [MANUAL EQ].
• Refer to [PRESET EQ] on page 25 for more information.
Other settings
1
Press the volume knob to enter [FUNCTION].
• For : Press AUD to enter [AUDIO CONTROL] directly.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
24
ENGLISH
)
.
[AUDIO CONTROL]
[SUB-W LEVEL] [LEVEL –50] to [LEVEL +10] ([LEVEL 0]): Adjusts the subwoofer
output level.
[EASY EQ] Adjusts your own sound settings.
• The settings are stored to [USER] in [PRESET EQ].
• The settings made may affect the current settings of [MANUAL EQ].
[SW]: [LEVEL –50] to [LEVEL +10]
[BASS]: [LEVEL –9] to [LEVEL +9]
[MID]: [LEVEL –9] to [LEVEL +9]
[TRE]: [LEVEL –9] to [LEVEL +9]
[MANUAL EQ] Adjusts your own sound settings for each source.
• The settings are stored to [USER] in [PRESET EQ].
• The settings made may affect the current settings of [EASY EQ].
[62.5HZ] [LEVEL]
[BASS EXTEND] [ON]: Turns on the extended bass. ; [OFF]: Cancels.
[100HZ]/[160HZ]/ [LEVEL –9] to [LEVEL +9] ([LEVEL 0]): Adjusts the level to memorize
[250HZ]/[400HZ]/ for each source.
[630HZ]/[1KHZ]/ (Before making an adjustment, select the source you want to adjust.)
[1.6KHZ]/[2.5KHZ]/
[4KHZ]/[6.3KHZ]/
[10KHZ]/[16KHZ]
[Q FACTOR] [1.35]/[1.50]/[2.00]: Adjusts the quality factor.
Default: [XX]
(Default: [LEVEL 0]
[LEVEL 0]
[LEVEL 0]
[LEVEL 0])
[LEVEL –9] to [LEVEL +9] ([LEVEL 0]): Adjusts the
level to memorize for each source.
(Before making an adjustment, select the source you
want to adjust.)