Aqua Medic aquasunlight NG + Timer Mode D'emploi page 13

READY!
For each channel, up to six different codes can be programmed. Thus, a planned series multiple is very
simple. The respective channels of the ITL - 3500 and further receivers can be switched on and off both
separately and at the same time.
The codes remain stored also after a power failure or disassembling of the receiver.
If several lights are to be controlled independently by a separate remote control, each light has to be
controlled by a different house code (A – P). For this purpose, existing programming is deleted and
afterwards the light has to be re-programmed.
There is another possibility to control several lights with identical house code with a separate remote
control each: Just program another code for each light (1st light 1 - 3, second light 4 - 6, etc.). In this case,
several lights can be controlled with a remote control independently.
Reset the codes:
Reset single codes:
Proceed as described in No. 1.) and 2.), but press button „OFF" at the transmitter instead of the button
„ON".
Reset all codes:
Press adjustment button (I, II or III) until the LED is flashing (approx 6 sec.). Now, press the adjustment
button (I, II or III) shortly again. All codes are reset now. No transmitters are needed for this.
Notes for possible troubles:
Other transmitters, like radio headphones, could possibly disturb the operation. For suspending several
lights, the distance between the receivers should be at least 50 cm.
The product corresponds to the guidelines 73/23/EWG and 99/5/EG radio interface parameter sub class 20.
We herewith declare that the transmission radiation will not be dangerous.
3. Warranty conditions
AB Aqua Medic GmbH grants the first-time user a 24-month guarantee from the date of purchase on all
material and manufacturing defects of the device. Incidentally, the consumer has legal rights; these are not
limited by this warranty. This warranty does not cover user serviceable parts, due to normal wear & tear ie:
impellers or drive wheels etc. The original invoice or receipt is required as proof of purchase. During the
warranty period, we will repair the product for free by installing new or renewed parts. This warranty only
covers material and processing faults that occur when used as intended. It does not apply to damage
caused by transport, improper handling, incorrect installation, negligence, interference or repairs made by
unauthorized persons. In case of a fault with the unit during or after the warranty period, please
contact your dealer. All further steps are clarified between the dealer and AB Aqua Medic. All
complaints and returns that are not sent to us via specialist dealers cannot be processed. AB
Aqua Medic is not liable for consequential damages resulting from the use of any of our products.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
- Technical changes reserved – 08/2019
13