brennenstuhl 1171910 Notice D'utilisation page 9

011809 Bewegungsmelder PIR 240_011809 BA_Bewegungsmelder PIR 240 08.12.15 13:
PIR 240 IP44 V2
INSTALLATION
Important:
1. The motion detector must be installed by a qualified electrician
in compliance with the IEC's regulations for wiring.
2. The installation has to be in accordance to national regulations
and laws. In many countries there are additional requirements
to the national requirements.
3. Before working on electrical appliances, make sure that the
power is turned off (breaker/ main switch).
4. The motion sensor may only be used to trigger lights.
Control elements
Terminal strip
Mounting screws
220-240 V~ 50/60 Hz
Light
Power supply
Fig. 2
Power cord Light cord
Mounting plate
Blue }
Brown
Black
Earth
PIR