brennenstuhl 1171910 Notice D'utilisation page 12

011809 Bewegungsmelder PIR 240_011809 BA_Bewegungsmelder PIR 240 08.12.15 13:
Problem:
Possible Cause1:
Possible Cause2:
Problem:
Possible Cause:
Problem:
Possible Cause:
Important:
1. Clean the sensor lens off with a damp cloth every 3 months, so
that no dust accumulates and the correct function of the
motion detector is assured.
2. Do not perform any technical modifications on this product.
3. Infrared-motion detectors are more sensitive in cold, dry
weather than in warm, humid weather.
4. Do not turn the setting dial through more than 360°. Turn the
setting dial carefully until it stops and then back in the other
irection.
Suggested Solution:
Suggested Solution:
Suggested Solution:
Suggested Solution:
PIR 240 IP44 V2