CAMERA SETUP
Here you can set the following:
CAMERA SETUP
CAMERA TITLE
CAMERA COLOR SETUP
CAMERA ACTIVE SETUP
MOTION SETUP
SELECT MENU: ▲▼, & [ENTER]
CAMERA TITLE:
With the direction keys
and confirm your selection with Enter (3).
Use the +/– buttons to change the letters.
To change the cursor position in the camera title, use the
To exit this menu item, press the menu key again (15).
CAMERA COLOR SETUP:
Use the +/– buttons to select the camera input for which you want to change the colour setup.
Press the direction keys
Use the – and + keys to change the setting on the selected slider.
The setting applies to the selected camera input only.
To exit this menu item, press the menu key again (15).
CAMERA ACTIVE SETUP:
Use the direction keys
▲▼
Use the direction keys
or REC (recording) mode.
Press the Enter key
(3) to activate/deactivate the selected camera input.
To exit this menu item, press the menu key again (15).
IMPORTANT:
CHANNEL 1 / LIVE / OFF: No live picture is shown on the monitor.
CHANNEL 1 / REC / OFF: Recording on channel 1 not possible.
MOTION SETUP:
MOTION CONFIGURATION
Confirm your selection with Enter
Use the +/– buttons to select the camera input for which you want to change the setup.
Press the direction keys
- CHANNEL
- SENSITIVITY GRADE
- MOTION DISPLAY TYPE
- RECORD DURATION
Use the – and + keys to change the setting on the selected slider.
To exit this menu item, press the menu key again (15).
You select a menu item using the direction keys (2 and 5).
If you confirm your selection with Enter (3), the respective
submenu opens.
(2 and 5), select the camera input for which you want to change the camera title
▲▼
(2 and 5) to select a slider.
▲▼
(2 and 5) to select the camera input for which you want to change the setup.
(1 and 4) to select the mode for which you want to change the setup: LIVE mode
(3) to open another submenu.
(2 and 5) to select the cursor position.
▲▼
01
4
CELL / BOX / OFF
05 SEC
direction keys (1 and 4).
18