Hard Disk - Abus EYTRON TV8901 Instructions D'installation

Hard disk

Recommended hard disks: MAXTOR, SEAGATE, HITACHI, SAMSUNG
Fitting the hard disk
1. Step: Switch off the digital recorder and open the hard-disk slot.
2. Step: Turn the handle carfully to the left and pull the HDD frame carefully out of the slot.
(Keys and fitting screws are contained in the HDD frame.)
3. Step: Push the plastic lock of the HDD frame cover down and push
the upper cover of the HDD frame back.
4. Step: Change the hard disk jumper so that the hard disk works as MASTER.
5. Step: Connect the hard disk supplied to the HDD frame using a 4-pole power cable and a flat-tape
data cable.
6. Step: Fix the hard-disk with two screws on the left and two screws on the right of the
HDD frame and then close the frame with the upper cover.
7. Step: Insert the HDD frame back into the slot, push it until engages, and turn
the handle to the right.
Now lock the hard disk with the key.
10