Fs Full Scale Display; Erasing The Min/Max Values; Ofl Display; Zero Point Correction (Zero) - WEBTEC HPM110 Mode D'emploi

5.5 FS Full Scale display

Displaying the upper limit of the scale (FS) is designed to
increase readability of the bar graph function.
The upper limit of the measurement range is indicated
numerically.
FS is indicated in sequence after MIN and MAX.
FS is displayed.

5.6 Erasing the MIN/MAX values

Erases MIN/MAX values.

5.7 OFL Display

5.8 Zero point correction (ZERO)

The zero point can be corrected manually should undesired
deviations occur when no system pressure is being applied
(atmospheric pressure).
This indicates that the applied pressure is
outside given full scale range.
If the message remains displayed when the
HPM110 is disconected from the pressure
source, please consult a Webtec Sales Office.
15