Ordering Replacement Parts - EINHELL Bavaria BOFT 800 Mode D'emploi

Anleitung BOFT 800 SPK1
GB
7. Cleaning and ordering replacement
parts
Always pull out the mains power plug before
starting any cleaning work.
7.1 Cleaning
Keep the safety devices free of dirt and dust as
far as possible. Wipe the equipment with a clean
cloth or blow it with compressed air at low
pressure.
We recommend that you clean the device
immediately each time you have finished using it.
Clean the equipment regularly with a moist cloth
and some soft soap. Do not use cleaning agents
or solvents; these could attack the plastic parts of
the equipment. Ensure that no water can seep
into the device.

7.2 Ordering replacement parts

Please provide the following information on all
orders for spare parts:
Model/type of machine
Article number of the machine
ID number of the machine
Replacement part number of the required spare
part
For our latest prices and information please go to
www.ISC-GmbH.info
12
10.03.2006 10:57 Uhr Seite 12