Mode 1: Upright Vac - shark NV370 Manuel Du Propriétaire

Mode 1: Upright Vac

To reduce the risk of electric shock, unplug the unit before assembling, adding or removing attachments or
converting modes.
WARNING: The On/Off switch is on the top of the Lift-Away
("O" position) before plugging and unplugging.
Fig. 8
TO ASSEMBLE:
Place the floor nozzle on a level surface.
1
Align the tube of the floor nozzle with the tube on
2
the Lift-Away canister and lower until you hear the
®
two pieces click into place. (Fig. 8)
When attaching the motorized floor brush, ensure
that the latching mechanism is fully locked in place
to ensure electrical connection has been made.
Attach the end of the extension wand to the tube on
3
the back of the Lift-Away
place. (Fig. 9)
Slide the accessory holder (a) positioned opposite
4
the upper cord wrap, over the extension wand. Align
the tab with the groove and push down. (Fig. 10)
12 TOLL FREE: 1-800-798-7398
Fig. 9
canister until it clicks into
®
canister. Always ensure the power is OFF
®
Upper Cord
Storage Wrap
c
Fig. 10
Push the handle (b) onto the top of the extension
5
wand until you hear it click into place. (Fig. 10)
Insert the end of the stretch hose (c) into the
6
connector on the back of the Lift-Away
(Fig. 10)
Store the dusting brush (d) and the crevice tool (e)
7
on the mounts of the accessory holder.
(Fig. 10)
b
d
a
e
canister.
®