Hendi 208502 Mode D'emploi page 13

Possible problems and how to solve them
Problem
Power switch is in ON position,
but the lamp on the switch and
the in-use indicator lamp do not
light up.
Power switch is in the ON
position and the lamp on the
switch is on, but the in-use
indicator lamp does not light up.
Power switch is in the ON
position and both lamps are lit
up but the water is not passing
through the machine.
Appliance works, but water flow
is sometimes interrupted for
more than five minutes.
A fuse in the fuse box blows
when the appliance is turned
on.
► Empty the appliance (no water can remain in the appliance) before it is repaired.
Guarantee
Any defect affecting the functionality of the appliance that becomes apparent within one year of
purchase will be corrected by free repair or replacement provided the appliance has been used and
maintained in accordance with the instructions and has not been abused or misused in any way. Your
statutory rights are not affected. If the appliance is under guarantee, state where and when it was
bought and include proof of purchase (e.g. till receipt). In line with our policy of continuous product
development we reserve the right to change the product, packaging and documentation
specifications without notice.
Discard
At the end of the life of the appliance, please dispose of the appliance according to the regulations
and guidelines applicable at the time.
Possible cause
1. Appliance is not plugged in.
2. Power switch is broken.
1. Relay is broken.
2. Water level sensor is broken.
1. Heating element is broken.
2. Temperature safety device is
damaged.
1. Relay is broken.
2.Temperature safety device is
damaged.
1. Short circuit.
If in doubt, always contact your supplier!
Solution
1. Insert plug into socket.
2. Contact your supplier for a
new switch.
Contact your supplier.
Contact your supplier.
Contact your supplier.
Contact your supplier.