Controls - NEC MultiSync LCD1990FX Manuel D'utilisation

Controls

OSM (On-Screen Manager) control buttons, located on the front
®
of the monitor, function as follows:
To access OSM menu, press any of the following control buttons: EXIT, LEFT, RIGHT,
UP, or DOWN.
To change the input source signal when the OSM is closed, press the SELECT button.
1 2 3 4
1 AMBIBRIGHT SENSOR
2 POWER
3 LED
4 INPUT/SELECT
5 EXIT
6 LEFT/RIGHT
7 UP/DOWN
8 RESET/ROTATE OSM
9 KEY GUIDE
*The "LEFT/RIGHT" and "UP/DOWN" buttons functionality is interchangeable
depending on the orientation (landscape/portrait) of the OSM.
5 6
Detects the level of ambient lighting allowing the monitor
to make adjustments to various settings resulting in a more
comfortable viewing experience. Do not cover this sensor.
Turns the monitor on and off.
Indicates that the power is on.
Can be changed between blue and green in the Advanced
OSM Control menu.
Enters the OSM Control menu. Enters OSM sub menus.
Changes the input source when not in the OSM Control
menu.
Exits the OSM sub menu. Exits OSM Control menu.
Navigates to the left or right through the OSM Control
menu.
Navigates up or down through the OSM Control menu.
Resets the OSM back to factory settings.
Pressing when the OSM is not showing rotates the OSM
Control menu between portrait and landscape mode.*
The Key Guide appears on screen when the OSM control
menu is accessed. The Key Guide will rotate when the OSM
control menu is rotated.
8
7
Landscape
9
Portrait
9