Metabo HPT VB 3616DA Mode D'emploi page 32

English
OPTIONAL ACCESSORIES.......sold separately
WARNING
Do not bend the rebar with #5 (5/8" in diameter) using the center roller set (D38) and center roller set
(D50).
Otherwise, there is a fear that the rebar may snap.
1. Battery (BSL36B18)
2. Battery charger (UC18YSL3)
3. Battery cover (Code No. 329897)
4. Cutter (Fig. 57)(Code No. 319706)
* One set containing two pieces
5. Center Roller (D 50) Set (Fig. 58)(Code No. 321446)
* This is used when the bending diameter of a rebar
is changed to (bent diameter: ø2" (50 mm)).
2" (50 mm)
32
Fig. 57
Fig. 58
6. Center Roller (D 38) Set (Fig. 59)(Code No. 321445)
* This is used when the bending diameter of a rebar
is changed to (bent diameter: ø1-1/2" (38 mm)).
1-1/2" (38 mm)
D 38
Fig. 59