Assembly And Operation; Applications - Metabo HPT VB 3616DA Mode D'emploi

English

APPLICATIONS

○ Cutting of rebar
○ Bending of rebar
REMOVAL AND INSTALLATION METHOD
OF BATTERY COVER AND BATTERY
When removing
Remove the battery cover and then remove the
battery.
When removing the battery from the tool, press down
the latches on both sides and slide off the battery.
Battery cover
Remove
2 Pull off
12

ASSEMBLY AND OPERATION

Latch
Battery (Both sides)
1 Press
Fig. 8
When attaching
When attaching the battery, push in until you hear a
click.
After that, attach the battery cover.
Battery
Attach
Battery cover
Attach
NOTE
Make sure the battery cover is attached when
operating the tool.
Iron fi lings in the battery terminal area may result in
malfunction.
Fig. 9