HYDAC ELECTRONIC HPG 3000-000 Notice D'utilisation page 21

User Manual HYDAC Programming Unit "HPG 3000-000" 2008/12/12
6. HPG 3000 – program flow chart
After connecting the HPG 3000 to the EDS 4000, switch on the voltage supply.
The message "HPG" appears.
Afterwards you can navigate through the relevant menus, as shown.
Note: If no key is pressed for 5 s, the display jumps to the next higher menu. In so doing
changed values are accepted.
HYDAC
SP
SP
mode
mode
mode
mode
mode mode
mode
mode
mode
8