Switch On Delay; Switch Off Delay; Information Specific To The Unit - HYDAC ELECTRONIC HPG 3000-000 Notice D'utilisation

User Manual HYDAC Programming Unit "HPG 3000-000"

4.1.4 Switch on delay

Time in milliseconds [ms] which must elapse, once the switch point has been reached or
exceeded, before switching will occur.
Abbreviations:

4.1.5 Switch off delay

Time in milliseconds which must elapse, once the pressure has fallen below the particular switch-
back point, before switching will occur.
Abbreviations:

4.2 Information specific to the unit

In the info menu, information specific to the unit can be checked quickly and simply.
The following details are displayed:
- Measuring range (Pressure range)
- Number of switch outputs
= Switch on delay [ms] for switching output 1
= Switch on delay [ms] for switching output 2
= Switch off delay [ms] for switching output 1
= Switch off delay [ms] for switching output 2
= display of the measuring range of the EDS 4000 connected
= Number of switch outputs of the EDS 4000 connected
(number of switch points)
= The connected EDS 4000 has 1 switch output
= The connected EDS 4000 has 2 switch outputs
2008/12/12
6