Setting The Buzzers - Sony SVO-1330 Mode D'emploi

Setting the Buzzers

You can turn on/off the following buzzers.
• TAPE END buzzer: Beeps when the tape reaches
its end or the tape counter shows the reading set on
the "TAPE END" option in the SET UP menu.
• Warning buzzer: Beeps when the unit outputs a
warning signal from the WARNING OUT terminal.
6
MENU SHIFT b
SHIFT v
1
Press MENU.
The main menu appears.
1. CLOCK SET
DAYLIGHT SET
LANGUAGE
2. TIMER SET
3. SET UP
USED TIME
2
Press SHIFT v to select 3.SET UP/USED TIME,
then press SHIFT b.
The SET UP menu appears on the screen.
[ SET UP ]
TAPE T-120
END ALARM END
TAPE END REW
APC ON
0 1 : 0 0
CLOCK ADJ
BUZZER ON
THREAD CHECK ON
[ USED TIME ]
HEAD 00005H
3
Press SHIFT v to flash the setting of "BUZZER."
[ SET UP ]
TAPE T-120
END ALARM END
TAPE END REW
APC ON
CLOCK ADJ 0 1 : 0 0
BUZZER ON
THREAD CHECK ON
[ USED TIME ]
HEAD 00005H
12
(US)
r P
p 0 ( )
DATA +/–
4
Set to ON or OFF using DATA +/–.
[ SET UP ]
TAPE T-120
END ALARM END
TAPE END REW
APC ON
CLOCK ADJ 0 1 : 0 0
BUZZER OFF
THREAD CHECK ON
[ USED TIME ]
HEAD 00005H
5
Press MENU twice to return to the normal display.
To stop the TAPE END buzzer
Press the p STOP button.
To stop the warning buzzer
Press one of the tape operation buttons (e.g. p STOP).