emerio WK-126083 1 Série Mode D'emploi page 6

Bouilloire de voyage
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
WK-126083.1/WK-126083.2
HOUSEHOLD USE ONLY
PARTS DESCRIPTION
1. Lid
2. Lid cover
3. Lock/unlock switch
4. On/off button
5. Detachable power cord
6. Storage bag
BEFORE USING YOUR KETTLE
1)
Use the power cord provided with the appliance.
2)
Toggle the lock/unlock switch to position "
Close the lid cover, then toggle the lock/unlock switch to position " " to lock the lid cover.
3)
If you are using the kettle for the first time, it is recommended that you clean your kettle before use by
boiling a full kettle of water twice and then discarding the water.
OPERATION OF YOUR KETTLE
1.
Twist off the lid; pour out left over water from previous boiling cycle and fill with the fresh water to the
maximum (350mL) marks.
NOTE: Do not fill the water over the maximum level, as water may spill out when boiling.
2.
Twist the lid back, and remember to keep the lid cover open during the operation to avoid producing
large amount of gas.
3.
Connect the detachable power cord to the appliance and power supply. Press the on/off button once, the
appliance starts to boil the water. The button will illuminate red.
4.
When the water has boiled, the appliance will switch to the keep warm function automatically. One hour
later, the appliance will switch off automatically. You can press the on/off button at any moment to turn
off the appliance.
NOTE: operate carefully when pouring the water from your kettle as boiling water will scald.
5.
Unplug it after use. The kettle is easy to carry, you can take it to work, travel, etc...
6.
Should you accidentally allow the kettle to operate without water, the boil-dry protection will
automatically switch it off. If this occurs, allow the kettle to cool down before filling with cold water and
re-boiling.
CLEANING AND MAINTENANCE
1.
Always let the kettle cool down first and disconnect the appliance from the power outlet before cleaning.
2.
Never immerse the kettle area or cord in water, or allow moisture to contact with these parts.
Cleaning appearance of housing:
Wipe the appearance of body with a mild and damp cloth or cleaner, never use a poisonous cleaner.
Descale regularly, preferably at least once a month and more frequently if your water is very hard.
To descale your kettle, use:
• white vinegar
", then press the lock/unlock switch to open the lid cover.
- 5 -
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Wk-126083 2 série

Table des Matières