Jøtul F 105 R Manuel D'installation page 17

External air supply through a rear
outlet
Fig. 15
A
1. Fasten the adapter (A) to the burn chamber using the two
accompanying screws (B) (pre-mounted on Jøtul F 105 B).
Fig. 16
B
2. Fasten the external air connector (A) to the adapter by
inserting the two screws (B) into the track and tightening
with the nuts (C).
B B
C
C
A
B
Outside air connection through the base
Through a rear outlet
Fig. 17
3. For fastening Ø 80 fresh air intake tube (optional equipment
– item no. 51047509), see the manual (item no. 10047508)
accompanying the external air set. See the installation
instructions that follow with the external air set. Attach the
hose to the external air connector with a hose clip to avoid
using joints. The external air hose insulation ends approx.
100 mm below the burn chamber.
Through the floor
Fig. 18
4. For fastening Ø 80 fresh air intake tube (optional equipment
– item no. 51047509), see the manual (item no. 10047508)
accompanying the external air set. See the installation
instructions that follow with the external air set. Attach the
hose to the external air connector with a hose clip to avoid
using joints. The external air hose insulation ends approx.
100 mm below the burn chamber.
ENGLISH
17