Festool BS 105 Notice D'utilisation D'origine page 9

Belt sander
Technical data
Power
Sanding belt
width
length
Sanding speed
no load
Rated load
Weight (excluding cable)
Degree of protection
The specifi ed illustrations can be found at the
beginning of the operating instructions.
Graphical symbols
Caution. Danger!
Read the operating instructions/notes
Wear ear protection!
1 Intended use
As specified, the machines are designed for
sanding wood, plastic, metal, fi ller and painted
surfaces.
Materials containing asbestos must not be pro-
cessed.
Use only original Festool accessories and Festool
consumable material designed for this machine
because these components are designed spe-
cifi cally for the machine. Using accessories and
consumable material from other suppliers will
most likely affect the quality of your working
results and limit any warranty claims. Machine
wear or your own personal workload may increase
depending on the application. Protect yourself and
your machine, and preserve your warranty claims
by always using original Festool accessories and
Festool consumable material!
The user is liable for damage and injury
resulting from incorrect usage!
2 Safety instructions
2.1 General Safety Rules
WARNING! Read all safety warnings and
all instructions. Failure to follow the warn-
ings and instructions may result in electric shock,
fi re and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers
to your mains-operated (corded) power tool or
BS 105/BS 105 E
1200/1400 W
105 mm
620 mm
380/230-380 m/min
320/170-340 m/min
6.4/6.5 kg
/ II
battery-operated (cordless) power tool.
2.2 Tool-specifi c safety rules
Wear suitable personal protection
equipment: ear protection to re-
duce the risk of damaging your
hearing; protective goggles; pro-
tective gloves when handling
tools and coarse materials
- Harmful/toxic dusts can occur during your work
(e.g. lead-containing paint, some types of wood
and metal). Contact with these dusts, espe-
cially inhaling them, can represent a hazard for
operating personnel or persons in the vicinity.
Comply with the safety regulations that apply
in your country. Connect the electric power tool
to a suitable extraction system. To protect your
health, wear a P2 protective mask.
- The manufacturer's handling and processing
instructions must be observed without fail if
explosive or self-igniting dusts are likely to oc-
cur during sanding.
- Persons with long hair should wear a hair net
while using the machine. Never work with baggy
clothing.
- Make sure the mains cable always leads away
from the rear of the machine.
- Never use worn, ripped or heavily clogged sand-
ing belts.
- Hold power tool by the insulated gripping
surface, because the belt may contact its own
power cord. Contact with a "live" wire will make
exposed metal parts of the power tool "live" and
shock the operator.
2.3 Noise and vibration information
The typical values determined in accordance with
EN 60745 are:
Sound-pressure level
Sound-power level
Measuring uncertainty allowance
Wear ear protection!
Overall vibration levels a
rections) measured in accordance with EN 60745:
Handle
Auxiliary handle
The emission values specifi ed (vibration, noise)
were measured in accordance with the test con-
ditions stipulated in EN 60745 and are intended
9
87 dB(A)
98 dB(A)
K = 3 dB
(vector sum for three di-
h
a < 2.5 m/s²
h
K = 1.5 m/s²
a = 6.0 m/s²
h
K = 2.0 m/s²