Festool BS 105 Notice D'utilisation D'origine page 12

Always keep the machine and the ventilation slots
clean.
The tool is fi tted with special motor brushes with
an automatic cut-out. When the brushes become
worn the power supply is shut off automatically
and the tool comes to a standstill.
The sanding base (3.4) must be replaced if the
graphite coating is worn. Unscrew the three
screws (3.2) and remove the retaining strip (3.3).
7 Accessories, tools
Use only original Festool accessories and Festool
consumable material designed for this machine
because these system components are designed
specifi cally for the machine. Using accessories
and consumable material from other suppliers
will most likely affect the quality of your working
results and limit any warranty claims. Machine
wear or your own personal workload may increase
depending on the application. Protect yourself and
your machine, and preserve your warranty claims
by always using original Festool accessories and
Festool consumable material!
The order numbers of the accessories listed below
can be found in the Festool catalogue or on the
Internet under "www.festool.com".
Sanding base
A sanding base specially designed for heavy-duty
sanding work and maximum material removal is
available.
Sanding belts
- Synthetic-resin bonded X fabric sanding belts:
sanding wood, fi breboard, iron, sheet steel, non-
ferrous metals and light alloy.
- Combination sanding belts: removing coatings
and concrete residues, sanding plastered sur-
faces.
8 Disposal
Do not throw the power tool in your household
waste! Dispose of the machine, accessories and
packaging at an environmentally-responsible
recycling centre! Observe the valid national regu-
lations.
EU only: European Directive 2002/96/EC stipulate
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
9 Warranty
For our tools, we give warranty for material and
production defects in accordance with the locally
applicable legal provisions, but in any case for at
least 12 months. Within the EU member states,
the warranty period is 24 months (verifi cation
through invoice or delivery note). Damage caused
by, in particular, natural wear, overloading, incor-
rect handling, or damage caused by the operator,
or damage caused through use of the equipment
contrary that specifi ed in the Operating Instruc-
tions, or damage which was known at the time of
purchase, is not covered by the warranty. Further-
more, damage caused by the use of non-original
Festool accessories and consumable material
(e.g. sanding pads) is also excluded. Complaints
can only be recognised if the tool is returned while
still assembled to the supplier or an authorised
Festool Customer Service workshop. Keep the
Operating Instructions, Safety Instructions, Spare
Parts List and purchase receipt in a safe place.
Otherwise the respective, current warranty condi-
tions of the manufacturer shall apply.
Note
Due to continuous research and development
work, we reserve the right to make changes to the
technical content of this documentation.
REACH for Festool products, their accessories
and consumables
REACh is a European Chemical Directive that
came into effect in 2007. As "downstream users"
and product manufacturers, we are aware of our
duty to provide our customers with information.
We have set up the following website to keep you
updated with all the latest news and provide you
with information on all the materials used in our
existing products: www.festool.com/reach
12