Table des Matières
Publicité
Advantages of the SOL-50 profile system
Optical:
•
Aesthetic fitting of the profile system into the surroundings
•
Uniform energy area by pushing the components into the horizontal profile, even with uneven
roof surfaces
•
Later extension of the system easily possible
Costs:
•
Quick and secure installation provides a cost advantage.
•
Higher yields through optimum back-ventilation of the modules.
•
Installation video for rapidly learning the installation process
•
Module installation on the roof without tools
Safety:
•
Large spacing between the roof hooks due to the high rigidity of the horizontal and vertical
profiles
•
Stress-free seating of the modules with a positive-fit connection with the horizontal profile
•
Secure drainage and ventilation using special profiles for the horizontal profiles, thus eliminat-
ing frost and corrosion damage to the modules
•
Protected cable runs in the horizontal and vertical profiles.
•
System statics for the SOL-50 on-roof system
SOL-50 profile systems are a patent of SEN Solare Energiesysteme Nord Vertriebsgesell-
schaft mbH
Subject to technical changes!
Safety notes:
•
U se fall protection on the roof as required by regulations! Wear safety shoes!
•
M aintain safety distances to exposed electrical cables!
•
Lay PV modules carefully, as they are shock sensitive and cannot be walked on.
•
U nder the effect of light, the PV modules are sources of electrical voltage that cannot be swit-
ched off. Do not insert metal objects into the plug connections!
•
The plug connections must be kept clean!
•
Before beginning work on the system, the power inverter must be disconnected by a specialist
electrical firm on the alternating and direct sides!
•
The connection to the power inverter may only be made by a certified electrical installer!
•
Test the phase voltage before connecting the power inverter! Note the maximum input voltage
for the power inverter!
•
Before connecting or disconnecting the plug from the solar generator, isolate from power in-
verter! Never connect or disconnect under load current!
•
It must be ensured that the weight of the construction can be taken by the roof.
•
The installation instructions (solar modules) of the module manufacturer must be adhered to!
•
When using the SOL-50 connection system (2000 mm profile lengths), all vertical frames are
incorporated into the potential equalisation.
General notes
21
Publicité
Table des Matières
