Installation And Connections; Selecting The Location; Positioning The Appliance; Connecting To Power Supply - Pelgrim PKS 3178F/P01 Notice D'utilisation

Installation and connections

Selecting the location

Selecting the location
Positioning the Positioning the
appliance appliance
Connecting to power Connecting to power
supply supply
26
• Place the appliance in dry and well aired room. The
appliance operates best at temperature ranges indicated in
the chart below. Relevant class of the appliance is indicated
on the rating plate.
Class
SN (subnormal)
N (normal)
ST (subtropical)
T (tropical)
Positioning the appliance requires two persons in order to avoid
injuries or damage to the appliance.
• Place the appliance fl atly and fi rmly on a solid base.
• Avoid exposing the appliance to direct sunlight or heat
sources. If this is not feasible, install insulation plate between
the appliance and adjacent heat source.
• The appliance may stand independently or you may
incorporate it into the kitchen cabinet. Be sure to leave
enough space for cooling of condenser (distance from the
wall or the opening should be 200 cm
cabinet above the appliance should be at least 5 cm.
After the installation, the appliance mains plug should be
accessible!
• Use the power cord to connect the appliance to the mains
power. Wall outlet must be fi tted with ground terminal
(safety socket). Required nominal voltage and frequency
are indicated on the relevant label or rating plate of the
appliance.
• Mains power connection and grounding must be made in line
with standing regulations and local requirements.
The appliance is able to accommodate minor temporary voltage
tolerances, but they may not exceed -10% to +6%.
Ambient temperature
from + 10°C to + 32°C
from + 16°C to + 32°C
from + 16°C to + 38°C
from + 16°C to + 43°C
2
). Distance to the