Alarm Function - Renkforce 1416079 Mode D'emploi

Reset to factory settings
• In the system menu, select the item "Factory Reset" and push the SELECT (9) button.
• Select "Yes" and push the SELECT (9) button.
• The integrated micro processor is reset and the device switches off.
All settings are deleted in this procedure.
Display Illumination
• In the system menu, select the item "Backlight" and push the SELECT (9) button.
• Select the desired brightness of the display lighting and confirm the setting with the
SELECT (9) button.
High
Medium
Low
Sleep Timer
The sleep timer switches off the device automatically after an adjustable time.
• In the system menu, select the item "Sleep" and push the SELECT (9) button.
• Set the desired sleep time with the (4) or
button.
• The device will switch off automatically after the end of the set time. When you select
the item "Sleep off", the sleep timer is deactivated.
The following sleep times are available: Sleep off/10/20/30/60/70/80/90 minutes
f) Alarm Function
The device has 2 alarm times and a snooze function.
The alarm function is only active while the device is supplied with the AC/DC
adapter.
40
bright lighting
medium brightness
low brightness
(5) button and then push the SELECT (9)