Tone Generator / Dmm - SEFRAM 98 Manuel D'utilisation

Tone Generator / DMM

LINE 1
CONTINUITY
ONLY
Tone Generator
OFF
V
Ω
OFF
SEFRAM 98-GM
AutoRanging
Figure 1
Functions of Tone Generator:
Features
●Red and black test leads with a standard 4 conductor
modular cord and plug.
● A 3-position toggle switch controls the modes of
operation and two bi-colored LEDs display line polarity
for Lines 1 and 2.
● The tone and continuity (cont.) test functions only
apply to Line 1.
● A tone selection push button is located on the front
panel for choosing either a fast dual alternating tone or
a slow dual alternating tone directly.
CAUTION:DO NOT CONNECT TO AN ACTIVE AC
CIRCUIT EXCEEDING 24V IN THIS MODE.
LINE 2
POLARITY
(OFF)
DMM
CAT III
600V
LINE 1 LINE 2
POLARITY
(OFF)
CONTINUITY
ONLY
Tone Generator
OFF
V
Ω
OFF
SEFRAM 98-GM
DMM
AutoRanging
CAT III
600V
Figure 2
- -
3