Energetics PR 4910P E-Z Manuel D'assemblage page 7

Emergency Key / Stop
The function of the emergency stop: The safety key functions as the emergency stop. In an emergency situation,
remove the safety key from the console and the treadmill will come to a stop.
Follow the steps listed below if you experience pain, feel faint or need to stop your treadmill in an emergency
situation:
1. Grip handrails for support.
2. Step onto the lateral platform.
3. Pull the safety key off the console.
To activate an emergency stop, please detach the
safety key from the console.
EXERCISE AREA AND EMERGENCY DISMOUNT
The minimum workout area needs to be: refer to front page for details.
In addition, for safety purposes, an area of at least 200 cm in length and at least the same width as the
treadmill, needs to be kept clear behind the equipment when in use.
A
B
Please use the following steps to securely exit the treadmill:
1) Stop the treadmill by pushing the STOP (ST) button or
by pulling out the safety key. Make sure the machine
has come to a full stop before you completely stop
running or walking.
2) Simultaneously hold the side or front hand rails on
both sides in order to support yourself while the ma-
chine slows down.
3) While holding the hand rails tightly, place each foot
onto the lateral platforms (side rails).
4) Exit the treadmill on either side of the product.
Note: In case of an emergency, you may need to do
the above steps in a very short period of time (sec-
onds) to be able to securely get off the treadmill.
EN
FR
RU
SL
HR
BS
SR
7