Sound-To-Light Mode; Automatic Operation; Manual Operation; Inversion Of The Rotating Direction - Renkforce 1374784 Notice D'emploi

c) Sound-to-Light Mode
In Sound-to-Light mode, the moving head reacts to the music signals that are detected by the integrated
microphone. This causes the moving head to generate a light show in time to the music.
• Select SOUN in the menu.
• Push the ENTER button (4).
d) Automatic Operation
In automatic mode, the device works according to the command sequence pre-programmed in the
factory.
• Select AUtO in the menu.
• Push the button ENTER (4) and select the desired speed with the buttons UP (2) and DOWN (3)
(SLou = slow bzw. FASt = fast).
• Press the ENTER button (4) to confirm your input.
e) Manual Operation
• Select NAnU in the menu.
• Push the button ENTER (4) and use the buttons UP (2) and DOWN (3) to set the respective parameter:
P000-P255
t000-t255
r000-r255
G000-G255
b000-b255
• Confirm your input with the button ENTER (4) and use the buttons UP (2) and DOWN (3) to set the next
parameter.
• Press the ENTER button (4) to confirm your input.
f) Inversion of the Rotating Direction
• Select rPAN in the menu.
• Push the button ENTER (4) and use the buttons UP (2) and DOWN (3) to set NO or YES.
NO The rotating direction is not inverted.
YES The rotating direction is inverted.
• Press the ENTER button (4) to confirm your input.
32
Position PAN
Position TILT
Brightness red
Brightness green
Brightness blue