Horizon Fitness ANDES 2.0 Manuel Du Propriétaire page 21

ASSEMBLY STEP 8
17
5
18
4
16
19
NOTE: All hardware for this step is pre-installed.
A Remove 4 PRE-INSTALLED BOLTS (16) from the
CONSOLE (17).
B Attach the CONSOLE CABLES (4) to the
CONSOLE (17).
C Carefully tuck the CONSOLE CABLES (4) into the
CONSOLE MAST (5) before attaching the CONSOLE.
Attach CONSOLE (17) to CONSOLE MAST (5) using
4 PRE-INSTALLED BOLTS (16).
NOTE:
Do not to pinch any wires while attaching the console.
D Slide FRONT TOP CAP PIECE (18) and REAR TOP CAP
PIECE (19) over CONSOLE MAST (5) and snap into
place.
21