Toto TBN01201U Manuel D'installation Et D'utilisation page 5

2. Pass the Valves and Diverter assembly up through the installation holes.
Fasten the collar to the valves and diverter assembly until it stops.
3. Fixate valves and diverter assembly by threading the mounting nut up
the valves. Tighten retaining screws equally to secure. Finish tightening
connecting tube nuts.
Installation of TBN01201 (3 Hole Roman Tub Filler) is now complete.
If installing TBN01202 (4 Hole Roman Tub Filler), please continue.
INSTALLATION PROCEDURE
Collar
Gasket
(Foam)
Connecting
Hand shower port
Tube
TBN01202 Only
Collar
Gasket
(Foam)
Nut
5
Collar
Gasket
(Foam)
Mounting
Nut
Screw