General Information - WIKA A-AS-1 Mode D'emploi

1. General information

1. General information
The LED attachable indicator described in these operating instructions has been
■
manufactured using state-of-the-art technology. All components are subject to strin-
gent quality and environmental criteria during production. Our management system is
certified to ISO 9001 and ISO 14001.
GB
These operating instructions contain important information on handling the instru-
■
ment. Working safely requires that all safety instructions and work instructions are
observed.
Observe the relevant local accident prevention regulations and general safety regula-
■
tions for the instrument's range of use.
The operating instructions are part of the product and must be kept in the immediate
■
vicinity of the instrument and readily accessible to skilled personnel at any time.
Skilled personnel must have carefully read and understood the operating instructions,
■
prior to beginning any work.
The manufacturer's liability is void in the case of any damage caused by using the
■
product contrary to its intended use, non-compliance with these operating instruc-
tions, assignment of insufficiently qualified skilled personnel or unauthorised modifica-
tions to the instrument.
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Further information:
■
- Internet address:
- Relevant data sheet:
- Application consultant:
4
www.wika.de / www.wika.com
AC 80.09, PE 87.20
Tel.:
Fax:
E-mail:
WIKA operating instructions attachable indicator, models A-AS-1, WUR-1
(+49) 9372/132-8976
(+49) 9372/132-8008976
info@wika.com