GBC ThermaBind T500Pro Manuel D'utilisation page 4

Specifications
Format
Max binding thickness
Binding Cycle
Safety Shut Off
Electrical Power
Weight
Dimensions
Special notice
Thank you for choosing a GBC Binding Machine. We aim
to produce quality binding machines at an affordable
price, with many advanced features to enable you to
create excellent results every time. Before using your
machine for the first time, please take a few minutes to
read through this guide.
Safety instructions
YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS
IS IMPORTANT TO ACCO BRANDS EUROPE. IN THIS
INSTRUCTION MANUAL AND ON THE PRODUCT
ARE IMPORTANT SAFETY MESSAGES. READ THESE
MESSAGES CAREFULLY.
General safeguards
future reference.
is on a flat and stable surface.
may be hot.
mechanisms of this machine.
4
GBC ThermaBind T500Pro
DIN A4
45mm/500 Sheets
40-60 secs
Yes
220-240V AC, 40W
4.2kg
500mmx240mmx185mm
Location of controls
Cooling Rack
On/ Off Button
Wait Light
Ready Light
Heating Timer
Setting up
Remove your ThermaBind T500Pro from the
packaging. Check that the ratings plate on the
machine corresponds with your electricity supply.
Assemble the cooling rack by placing each panel into
the slots provided in the separate base-plate (Fig.1).
Place the Thermal Binder on a flat and stable
surface. The plug should be inserted into a near and
easily accessible outlet.
Press the 'On/Off' switch located at the front of
the machine (Fig.2). After the working temperature
has been reached the green light comes on and an
audible signal will indicate the machine is ready for
use.
Binding a document
The sheets of paper must be fanned to ensure every
sheet comes in contact with the glue
Ensure every sheet is inserted into the spine of the
cover (Fig.3).