Miscellaneous; Care And Maintenance - Medisana MTX Connect Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 58
GB

6 Miscellaneous

6.1
Care and
maintenance
6.2
Disposal
6.3
Guidelines /
Standards
32
• Remove the batteries before cleaning the unit.
• Never use strong detergents or hard brushes.
• Clean the unit with a soft cloth, moistened with mild soapy water. Do not let
water enter the unit. After cleaning, only use the unit when completely dry.
• Remove the batteries from the unit if you do not wish to use it for an
extended period of time, otherwise there is a risk of battery leakage.
• Do not expose the unit to direct sunlight, and protect it from dust and
moisture.
• Only inflate the cuff when it is in position around the upper arm.
• Servicing and calibration
The unit has been calibrated by the manufacturer for a period of two years'
use. In the case of commercial use, the unit must be serviced and recali-
brated at least once every two years. This calibration will be charged for and
can be carried out by an appropriate authority or an authorised service
centre - in accordance with the regulations for users of medical equipment.
This product must not be disposed of together with domestic waste.
All users are obliged to hand in all electrical or electronic devices, regardless
of whether or not they contain toxic substances, at a municipal or commer-
cial collection point so that they can be disposed of in an environmentally
acceptable manner.
Please remove the batteries before disposing of the device / unit. Do not dis-
pose of old batteries with your household waste, but at a battery collection
station at a recycling site or in a shop.
Consult your municipal authority or your dealer for information about disposal.
This blood pressure monitor meets the requirements of the EU standard for
non-invasive blood pressure monitors. It is certified in accordance with EC
Guidelines and carries the CE symbol (conformity symbol) "CE 0297".
The blood pressure monitor corresponds to European standards EN 60601-1, EN
60601-1-11 and EN 1060-3. The specifications of EU Guideline "93/42/EEC of
the Council Directive dated 14 June 1993 concerning medical devices" are met,
along with those of the Radio and Telecommunications Terminal Equipment
Directive 1999/5/EC. You can request the declaration of conformity from
Medisana AG, Jagenbergstraße 1, 41468 Neuss, Germany or download it from
the Medisana homepage (www.medisana.de).
Clinical trial results:
Clinical trials for this unit were carried out in the USA and Germany according
to EN 1060-1 /-3 and according to the AAMI – Standard (US).
Electromagnetic compatibility: (see attached leaflet
Intended use:
This unit is suitable for non-invasive blood pressure measurement in adults
(i.e., suitable for external use).
)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

51085

Table des Matières