• Install the alarm and control box:
- in as central a place as possible in relation to the associated radio devices,
- far away from possible sources of electromagnetic interference (electric meter or switchboard, telephone,
hi-fi equipment, etc.), vibration, dust or direct sunlight,
- more than 2 m away from the control panel, outdoor alarm sirens, and any other Diagral range radio receiver.
• Do not install it near a heating system or near a source of moisture.
• Do not place any devices on the box.
• Clean the alarm and control box using a soft and dry rag.
1. Pack content
• 1 alarm and control box
• 1 x 1 metre Ethernet LAN (RJ45) cable
• 1 x 220 V-5 V DC mains adapter
2. Description
1. Three-coloured indicator light
• green
• red
• orange (return to factory settings)
2. Ethernet 10/100 Base-T socket
3. 5 V DC – 1 A power socket
4. Button (return to factory settings)
3. Installation
3.1. Installation procedure
Remove the
1
flap.
Connect the box to your high-
3
speed modem (Freebox, Livebox,
Neufbox, Dartybox, BBox,
standard router, etc.) using the
Ethernet cable supplied.
IMPORTANT
• If your modem does not have an available Ethernet port, you can add a Switch in order to increase
the number of ports available. Only use the Ethernet cable provided or a similar grade cable if you
require a different length (3 meters max.): Cat. 6 F/UTP.
• All equipment connected to the box shall meet applicable standards.
4
Connect the mains adapter to a mains socket.
WARNING
• Equipment safety is only insured for use in accordance with the specified purpose.
Use only RXU13X mains adapter supplied with the box.
• Equipment shall be connected to an installation meeting standards applicable in the country.
• The mains adapter acts as a disconnection device and shall be easily accessible.
• 1 bag of accessories
• 4 anti-slip pads
• 1 installation guide
1.
Connect the mains
2
adapter to the box.
High-speed
modem
4.
2.
3.
Alarm and
control box
Ethernet cable
(supplied)
13