Electrical Safety - Elem Garden Technic CBE5530T Traduction Des Instructions D'origine

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Additional safety instructions for
grass trimmers
Warning! Cutting elements continue to rotate after
the motor is switched off.
u Be familiar with the controls and the proper use of
the appliance.
u Before use, check the power supply cord and
extension cord for signs of damage, ageing and
wear. If a cord becomes damaged during use,
disconnect the cord from the mains supply
immediately. DO NOT TOUCH THE CORD
BEFORE DISCONNECTING THE SUPPLY.
u Do not use the appliance if the cords are
damaged or worn.
u Wear stout shoes or boots to protect your feet.
u Wear long trousers to protect your legs.
u Before using the appliance, check that your
cutting path is free from sticks, stones, wire and
any other obstacles.
u Only use the appliance in the upright position,
with the cutting line near the ground. Never
switch the appliance on in any other position.
u Move slowly when using the appliance. Be aware
that freshly cut grass is damp and slippery.
u Do not work on steep slopes. Work across the
face of slopes, not up and down.
u Never cross gravel paths or roads while the
appliance is running.
u Never touch the cutting line while the appliance is
running.
u Do not put the appliance down until the cutting
line has come to a complete standstill.
u Use only the appropriate type of cutting line.
Never use metal cutting line or fishing line.
u Take care to keep the mains cable away from the
cutting line. Always be aware of the position of
the cable.
u Keep hands and feet away from the cutting line at
all times, especially when switching on the motor.
u Before using the appliance and after any impact,
check for signs of wear or damage and repair as
necessary.
u Never operate the appliance with damaged
guards or without guards in place.
u Take care against injury from any device fitted for
trimming the filament line length. After extending
new cutter line always return the machine to its
normal operating position before switching on.
u Always ensure that the ventilation slots are kept
clear of debris.
u Do not use the lawn trimmer (edge trimmer), if
the cords are damaged or worn.
u Keep extension cords away from cutting
elements.
Warning! Switch off, remove
plug from mains before
adjusting, cleaning or if cable
is cut, damaged or entangled.
The cutting line continues to
rotate for a few seconds after
the trimmer is switched off.
Caution – do not touch
WARNING: Packaging
materials are not toys!
Children must not play with
plastic bags! Danger of

ELECTRICAL SAFETY

Always check that the power
supply corresponds to the
voltage on the rating plate.
Electrical Safety
Your machine is double insulated for safety and
requires no earth connection. The operating voltage
is 230 V AC, 50 Hz (for non-EU countries 220 V,
240 V as applicable). Only use approved extension
cables.
It is recommended for increased electrical safety to
use a Residual Current Device (RCD) with a tripping
current of not more than 30 mA. Always check your
RCD every time you use it.
rotating cutting line.
suffocation!
24

Publicité

Table des Matières
loading

Table des Matières