Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT:
before operating hood.
Exterior Surfaces:
To avoid damage to the exterior surface, do not use steel wool or
Always wipe dry to avoid water marks.
Cleaning Method:
■
Liquid detergent soap and water, or all-purpose cleanser
■
Wipe with damp soft cloth or nonabrasive sponge, then rinse
with clean water and wipe dry.
Metal Grease Filter
To Remove Metal Grease Filters:
1.
handles, push toward the rear of the range hood and pull
down on the front handle to remove.
2.
3.
wash in a hot detergent solution to clean.
To Reinstall Metal Grease Filters:
1.
2. Push down on the rear handle and set the front of the grease
3.
RANGE HOOD CARE
Cleaning
Replacing a LED Lamp
Turn off the range hood and allow the LED lamp to cool.
To avoid damage or decreasing the life of the new bulb, do
wearing cotton gloves to handle bulb.
If new lamps do not operate, make sure the lamps are inserted
correctly before calling service.
1. Disconnect power.
2. Push up on the lens and turn it counterclockwise.
3. Remove the bulb and replace it with a 120 V, 6.5 watt
4. Repeat steps 2-3 for the other bulb if needed.
5. Reconnect power.
maximum LED bulb with a GU10 base. Turn it clockwise
to lock it into place.
11
Publicité
Table des Matières
