Preliminary Remarks 2 - IBP MediPro 100fn Mode D'emploi

-
This Blood Pressure Monitor complies with the European regulations and bears the CE mark
"CE 0366".
-
This Blood Pressure Monitor bears the CE (conformity) label for notinvasive Blood Pressure
Monitors to show that it conforms with the EU Council Directive (EN 1060-1 / EN 1060-3) for
notinvasive Blood Pressure Monitors. It also confirms with the EU Council Directive "93/42/EEC
of 14th June 1993 on Medical Products", and the EU Council Directive "89/336/EEC.
-
ibp hereby confirms that the product delivered together with this Instruction Manual complies
with this Directive.
-
To ensure accurate measurements, the Blood Pressure Monitor must receive a technical check-
up every 2 years. Inspection is also required when the blood pressure data supplied by the
monitor are obviously off-range. If you have any questions about these checks, please contact
our Customer Services Department (address on the warranty certificate).
the"Real Fuzzy" measuring technology
This Blood Pressure Monitor uses trends-setting "Real Fuzzy" Technology to detect your blood pressure.
With one touche of a button, the device will automatically start to inflate. If the pressure in the sleeve is
too low, the device will interrupt the measuring process and pump the sleeve higher until a suitable
pressure is reached. The ideal sleeve pressure is obtained from the systolic blood pressure and the size of
the arm. Arm pains are thus eliminated and incorrect readings due to a wrongly inflated sleeve are
prevented.

preliminary remarks 2

0366
3