Battery Installation / Battery Replacement - IBP MediPro 100fn Mode D'emploi

6 battery installation / replacement
battery installation /
battery replacement
The enclosed batteries must be fitted before use.
The battery cover is on the bottom side of the
unit. Push it open and remove it. Insert the 4
supplied "AA" size, 1.5 V alkaline batteries as
shown here. Ensure correct polarity according to
the indication inside the compartment. Replace the
battery cover by clicking in the bottom hooks first,
then push in the top end of the battery door.
Replace all the batteries when the battery replace-
ment sign appears on the LCD display, or
when the LCD display is blank after you switch on
the unit.
note:
As the supplied batteries are for test only, they may be discharged earlier than batteries you buy
in the store. Replace the batteries all of them the same time.
10