The Measuring Method - IBP MediPro 100fn Mode D'emploi

making a blood pressure measurement 7

7.3 the measuring method

a) Place the cuff around your arm as
described on pages 11 and 12.
b) Start the Monitor by pressing the
ON /OFF/START key.
When the ON/OFF/START key
c)
is pressed, all digits will light up
(see fig. 1). This is a check of the
display functions which is com-
plete after about 2 seconds. After
the LCD test, the digit "0" is
briefly displayed (see fig. 2).
When the display check is com-
plete, the LCD will show the pat-
tern on the right to indicate that
the unit is ready for use (fig. 2).
fig. 1 fig. 2
13