Publicité
Les langues disponibles
Les langues disponibles
Safety Instructions EP 400-DS:
Non-compliance with the safety instructions can result in danger both to persons and to the
environment and the
to the loss of any claims for damages. The operator
the contents of the Operating Instructions, particularly the Safety Instructions are known to
the operating personal.
-
If the equipment is not being used for a lengthy period, (e.g. a bank holiday or weekend), the
electric gear pump must always be disconnected from the mains. Switch off the pump at the On /
Off switch or pull out the plug.
The equipment must not be operated in potentially explosive areas.
-
Media in Hazardous Materials Class A1 and A2 must not be pumped.
-
Make sure that the 220V safety socket is protected by a fuse of at least 10A rating..
-
-
Before undertaking any repair or maintenance work shut off the power supply (pull out the mains
plug) and depressurise the equipment.
-
Make a regular check on the pressurised components (pressure hose and oil filler gun) and also
on the live parts of the pump for possible damage. Defective parts must be replaced with genuine
spares without delay.
Only use original accessories approved by MATO. No liability can be accepted for accidents
-
caused by components from other sources.
The operational safety of the equipment is only guaranteed if used in accordance with the
-
directions.
-
Maintenance, inspection and repairs must only be carried out by qualified specialist personnel,
who have acquainted themselves with the subject by studying the operating instructions.
Run the return hose of the safety valve (9) back to tank.
-
Interference with or changes to the safety valve (9) are not allowed.
-
Maintenance:
The electric gear pump requires no maintenance in operation.
Make a regular check on the pressurised components (pressure hose and oil filler gun) and also on
the live parts of the pump for possible damage.
Replace defective parts without delay.
Warranty:
If the operating instructions are complied with and the equipment used in accordance with the
directions, we accept liability within the bounds of the statutory warranty obligation (see our conditions
of delivery).
When making warranty claims always attach the invoice from your dealer, giving the date of purchase.
Your contribution to protecting the environment:
The pertinent regulations for the registration, setting up and operation of equipment for dealing with
materials hazardous to water must always be complied with by the user.
10
equipment. Non-compliance with the safety instructions can lead
of the equipment must ensure that
Publicité
