Important - Bartscher 66104400 Mode D'emploi

TAVOLO FREEZER
TEMPERATURE (BT) model) the digital control device (see Part. 15 ) following
the instructions.
Clean periodically the condenser using a paint brush or a vacuum cleaner after
removing the mains lead and taking care not to bend the aluminum fins.
Attention! The condenser has sharp edges, wear protective gloves when cleaning.
Do not use the refrigerator to cool hot or just cooked food.
The food inside the cell should be disposed on the grills without exceeding the
perimeter in such a way as to ensure an optimal passage of air .
In refrigerators at low temperature (freezer with negative temperature) introduce
only products already frozen. If you need to introduce not frozen food, make sure
it does not exceed 10 % of the cell content .
The doors of the appliance must be opened the least number of times possible
during the defrosting phase .
10.
Troubleshooting
If there is an abnormal elevation of the internal temperature of the machine, you
should check first if:
• the mains lead is securely plugged
• the power is not subject to variations of ± 10%
In case of malfunctioning and when these a.m. data are correct, you should call
your supplier.
Give information on the type of machine and its serial number: these data are
shown on the label of each unit.
11.

Important

The warranty certificate must be filled and sent to the manufacturing company
within 8 days after the installation of the machine.
Ed.10/2011
16