Connecting A Mc4-Y-Connector; Connecting Several Rapid Shutdown Boxes - Fronius Rapid Shutdown Box - Quattro Instructions D'installation

7
7
Connecting a If multiple strings are connected to an MPP tracker, the string voltages should be as equal
MC4-Y-Connector as possible in order to avoid power losses.
1
1
Connecting sev-
eral Rapid Shut-
down Boxes
If other connectors than MC4 (Stäubli) shall
be used in conjunction with the Fronius Ra-
pid Shutdown Box it is recommended to cut
the preconfigured MC4 connectors and to
be replaced by preferred connector brand
using proper tools and methods. Removal
of the hole cable set is not recommended
and will void warranty
2
2
15