Technical Data; Safety Information - brennenstuhl JARO 1000 Mode D'emploi

Operating Instructions
D
LED Light
LED Light with infrared motion detector
JARO
Note: Before use of the floodlight, please carefully read the operating instructions and store them
at a proper location!

TECHNICAL DATA

Protection class:
Protection type versions without motion detector: IP 65
Protection type versions with motion detector:
Nominal voltage:
Power factor:
This high-power LED floodlight is suitable for indoor and outdoor lighting purposes and for fixed
assembly.
The floodlight must not be used for other purposes.

SAFETY INFORMATION

1. The floodlight must be installed and maintained by a qualified specialist.
2. Electric installations may only be completed in compliance with the safety regulations
(VDE 0100 for Germany).
3. For the connection, a VDE-certified connection line (at least H05RN-F 3G1,0) must be used.
4. The floodlight must be grounded properly.
5. The floodlight must not be used without properly attached sealing rings!
6. LED floodlights are extremely bright. Please never look directly into the light.
7. If the protective cover is broken, it should be replaced with an original Brennenstuhl
protective cover before further use of the floodlight.
8. If the mains connection line for the floodlight or the connection box is damaged, it must be
replaced by a qualified specialist to avoid any risk.
9.
Hot surface at 100 W versions.
12
18P083 LED Strahler Jaro PIR 180904.indd 12
I
IP 44
220 – 240 V~ 50/60 Hz
see table (page 2)
04.09.2018 16:40:03