Functional Description - brennenstuhl JARO 1000 Mode D'emploi

Operating Instructions
D

FUNCTIONAL DESCRIPTION

(only for versions with motion sensor)
This floodlight is equipped with an infrared sensor. It is switched on automatically if the sensor
detects motion in the environment.
If possible, do not direct the motion sensor at swimming pools, heating air exhausts, air condi-
tioning units or objects which are exposed to major temperature fluctuations.
Avoid directing the motion sensor at trees or bushes or at places which could be frequently
visited by pets.
The motion sensor can be turned horizontally to the right and left and angled vertically up and
down.
When mounting the floodlight remember that the motion sensor will react most sensitively to
motions crossing its field of detection from one side to the other and least sensitively to motions
directly approaching the unit.
CONFIGURING THE MOTION DETECTOR (PIR)
Three controllers are located on the rear of the motion detector
TIME – time adjustment (left):
Using this controller, you can select any switch-on time between approx. 10 seconds and 5 min-
utes after the last motion was detected. Rotating the TIME controller clockwise decreases the
time period, rotating it counterclockwise increases it.
LUX – light adjustment (sun and moon symbol, right)
The light adjustment determines from what brightness level the sensor will switch on the flood-
light.
The (sun symbol) position indicates that the sensor works by day and at night, in the (moon
symbol) position, the sensor will only work at night. To adjust the sensor, wait until the desired
ambient brightness is reached. Completely rotate the light adjustment controller to the (moon)
symbol. Slowly rotate the controller in the direction of the (sun) symbol until the floodlight is
switched on by the motion.
The floodlight will now be activated from the set brightness when a motion is detected.
SENS – sensitivity adjustment (centre)
The sensitivity of the sensor depends on the ambient temperature. The lower the ambient tem-
perature, the greater the sensitivity of the motion detector.
The sensor is at its most sensitive when the SENS controller is turned all the way to the (+) direc-
tion.
Motion sensor:
Detection range:
Time adjustment:
Ambient brightness: 0 – 2000 lux
Sensitivity:
14
18P083 LED Strahler Jaro PIR 180904.indd 14
:
passive infrared sensor (PIR)
up to 10 m/up to 120° (horizontal)
approx. 10 sec. to 5 min.
3 to 10 m depending on the installation location
.
:
JARO
04.09.2018 16:40:03