Bosch GSR 12V-15 Professional Notice Originale page 13

Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal, ceramic and plastic.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Keyless chuck
(2) Torque presetting ring
(3) Gear selector switch
A)
(4) Battery release button
A)
(5) Rechargeable battery
(6) Rotational direction switch
(7) On/off switch
(8) Battery charge indicator
(9) "PowerLight" lamp
(10) Handle (insulated gripping surface)
A)
(11) Universal bit holder
A)
(12) Screwdriver bit
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless Drill/Driver
Article number
Rated voltage
A)
No-load speed
– First gear
– Second gear
Max. torque, hard/soft
screwdriving application ac-
A)
cording to ISO 5393
Max. drilling diameter
– Steel
– Wood
Max. screw diameter
Chuck capacity
Weight according to EPTA-
B)
Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
C)
ure during operation and
during storage
Recommended rechargeable
batteries
Bosch Power Tools
Cordless Drill/Driver
Recommended chargers
A) measured at 20–25 °C with battery GBA 12V 1.3Ah.
B) Depends on battery in use
C) Limited performance at temperatures <0 °C
Noise/vibration information
Noise emission values determined according to
EN 62841-2-1.
Typically, the A-weighted sound pressure level of the power
tool is 71 dB(A). Uncertainty K=5 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values a
determined according to EN 62841-2-1:
Drilling in metal: a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
GSR 12V-15
and noise emission value may differ. This may significantly
3 601 H68 1..
increase the vibration and noise emissions over the total
working period.
V= 12
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
-1
min 0–400
not actually being used should also be taken into account.
-1
min 0–1300 This may significantly reduce vibration and noise emissions
over the total working period.
Nm 30/15
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
mm 10
mm 19
Assembly
mm 7
u
mm 1.0–10
kg 1.0–1.2
°C 0 to +35
Charging the Battery (see figure A)
°C –20 to +50
u
GBA 12V...
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
(triax vector sum) and uncertainty K
h
2
<2.5 m/s , K = 1.5 m/s
h
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
1 609 92A 4T2 | (19.05.2020)
English | 13
GSR 12V-15
GAL 12...
GAX 18...
2