Preparation; Hedge Trimmer Safety Warnings - Ryobi OGS1822 Traduction Des Instructions Originales

other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
■
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
■
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
Battery tool use and care
■
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
■
Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire
■
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
■
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
Service
■
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that safety of the power tool is maintained.
GRASS SHEARS/SHRUBBER SAFETY
WARNINGS
WARNING
The cutting means continues to run after the motor is
switched off.
TRAINING
■
Read the instructions carefully. Be familiar with the
controls and the correct use of the product.
■
Never allow children, persons with reduced physical,
sensory, or mental capabilities or lack of experience
and knowledge, or people unfamiliar with these
instructions to use the product. Local regulations may
restrict the age of the operator.
■
Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or
their property.
2 | English

PREPARATION

■
Inspect the product before use. Replace damaged
parts.
■
Clear the area to be cut before each use. Remove all
objects such as cords, lights, wire, or string that can
become entangled in the cutting means.
■
Never operate the product while people, especially
children, or pets are nearby.
■
Replace cutter blades or any other parts that are
cracked, chipped, or damaged. Make sure the cutting
means is properly installed and securely fastened.
Failure to do so can result in personal injury to the
operator and bystanders, as well as damage to the
product.
■
Do not use the product if the switch will not turn the
product on or off. Any product that cannot be controlled
with the switch is dangerous and must be repaired.
■
Form the habit of checking to see that keys and
adjusting wrenches are removed from the product
before turning it on.
OPERATION
■
To reduce the risk of injury, always wear full eye
protection, footwear, and clothing when using the
product.
■
Dress properly. Do not wear loose clothing or jewellery;
they can be caught in moving parts. Use of gloves,
substantial footwear, and long trousers is recommended
when working outdoors.
■
Avoid using the product in bad weather conditions
especially when there is a risk of lightning.
■
Switch on the motor only when the hands and feet are
away from the cutting means.
■
Take care against injury to feet and hands from the
cutting means.
■
Always be aware of your surroundings and stay alert
for possible hazards that you may not hear due to the
noise of the product.
■
Never attempt to use an incomplete product or one
fitted with an unauthorised modification.

HEDGE TRIMMER SAFETY WARNINGS

■
Keep all parts of the body away from the cutter
blade. Do not remove the cut material or hold the
material to be cut when blades are moving. Make
sure the switch is off when clearing jammed
materials. A moment of inattention while operating the
hedge trimmer may result in serious personal injury.
■
Carry the hedge trimmer by the handle with the
cutter blade stopped. When transporting or storing
the hedge trimmer, always fit the cutting device
cover. Proper handling of the hedge trimmer reduces
possible personal injury from the cutter blades.
■
Hold the power tool by insulated gripping surfaces
only, because the cutter blade may contact hidden
wiring. Cutter blades contacting a "live" wire may make
exposed metal parts of the power tool "live" and could
give the operator an electric shock.
■
Keep cable away from cutting area. During operation,