Transport, Handling And Storage - Esmach NSE 30 Notice D'utilisation Et De Maintenance

SECTION B - POINT 1

TRANSPORT, HANDLING AND STORAGE

The weight and overall dimensions of the machine are given in Section A point 2.
The machine is shipped assembled and packed in a case/crate/pallet made of nailed wooden
boards provided with the symbols and indications for handling.
The operators in charge of handling the load must be qualified and adequately trained.
Store the machine in a dry ventilated room and cover it with a protective sheet.
EXAMPLE OF MACHINE UNLOADING WITH FORKLIFT TRUCK
Stage 2: rest the machine on the ground;
Stage 4: rest the machine on the ground on a flat solid
surface as near as possible to where it will be installed.
Figure n° 12
Stage 1: unload the machine from the lorry in its
packaging;
Stage 3: unpack and lift the machine by means of
the forklift truck until the pallet can be removed;
21