Munchkin brica SmartMove Notice D'utilisation page 6

Included Parts How to Install
SECURE THE CHILD SAFETY SEAT
Guide the strap through the seat's belt
path. Then insert the end of the strap
through the strap buckle as far as possible.
Tighten the strap by lifting and releasing
the buckle (Fig. b) until the seat is secure.
DO NOT over tighten.
ATTACH THE TETHER ANCHOR
(TETHER ANCHOR NOT INCLUDED)
For added security, attach the child seat's
own tether strap to the tether anchor point
on the bottom of the transporter. Remove
all slack from the tether strap by tighten-
ing. Store excess material.
6