Advanced Setup - Yamaha YRS-700 Mode D'emploi

Advanced setup

1
Press key to turn this unit to
standby mode.
2
While holding down INPUT key on the front
panel, press
control to turn on the power.
"ADVANCED SETUP" appears in the front panel
display.
3
Release INPUT key on the front panel.
Menu
TURN ON VOLUME
MAX VOLUME SET
PANEL INP. KEY
F.PANEL. KEY
R.INPUT POWER
AC ON STANDBY
FACTORY PRESET
y
1)
To return to the previous menu, press
y
2)
The default settings are marked with "*".
key on the remote
Description
Sets volume level at power-on.
Sets maximum volume.
Enables/disables the INPUT key on the front panel.
Enables/disables the keys on the front panel.
Enables/disables power-on by remote control input
keys when the unit is in standby mode.
Sets whether or not this unit returns to its previous
state when AC power is restored after a temporary
power loss.
Resets all settings to their default values, except
settings in ADVANCED SETUP.
RETURN key.
4
Press / to select the desired
menu on the front panel display and then
press ENTER key.
5
Change setting by pressing
6
Press key to set this unit to the
standby mode.
The new setting will be reflected when you turn on the
unit by pressing
Selectable item/ Adjustable range
Off* (Not set), 01 to 99, MAX (Maximum)
01 to 99, MAX* (Maximum)
P.INPUT: ON* (Enabled), P.INPUT: OFF
(Disabled)
P.INPUT: ON* (Enabled), P.INPUT: OFF
(Disabled)
R.INPUT PW: OFF* (Disables power-on),
R.INPUT PW: ON (Enables power-on)
AC STANDBY: OFF* (Restores the state before
power was lost),
AC STANDBY: ON (Enters standby mode)
PRST: CANCEL* (Reset is not performed),
PRST: RESET (Reset is performed)
1)
2)
/ key.
key.
23
En