Connecting - Yamaha YRS-700 Mode D'emploi

6
Check that the Bluetooth components
recognize the Bluetooth Wireless Audio
Receiver.
If the Bluetooth component detects the Yamaha Bluetooth
Wireless Audio Receiver, the audio receiver name
("YBA-10 YAMAHA", for example) appears in the
device list of the Bluetooth component.
7
Select the Bluetooth Wireless Audio
Receiver from the component list of the
Bluetooth components and input "0000"
for password of the Bluetooth.
4)

Connecting

1
Press DOCK key to set the input to
DOCK.
2
Press OPTION key.
3
Select "Connect" and press
5)
key.
4
To disconnect the Bluetooth Wireless
Audio Receiver from the Bluetooth
component, press
option menu, select "Disconnect", and
press ENTER key.
y
4)
When establishing the Bluetooth connection from this unit, it is only
possible to connect to the most recently connected Bluetooth component.
y
5)
• For details of messages, refer to "Bluetooth (☞p. 27)" in
"Troubleshooting".
ENTER
again to display
• If you want to establish a connection with a Bluetooth other than the
one most recently connected, initiate the connection from that
Bluetooth component. Refer to the manual of your Bluetooth
component for details.
Playback features
17
En