Unit Description; Technical Specifications - BoomToneDJ Motion Beam 3 Mode D'emploi

2- Unit Description

Menu :
Button:
1. MENU
2. UP
3. DOWN
4. ENTER
Note:(1) In about 10 seconds, if no buttons were pressed, the LED display will be off.
Press any button to turn the display on again.
(2) After pressing a button, all the parameters will be saved after about 2
seconds.
(3) No matter what the program in which mode, once to detect the DMX or
SLAVE signal, the program will jump into DMX or SLAVE mode automatically.
Then, if DMX/SLAVE signal was disconnected, the program will return to the
original mode.

3- Technical Specifications

● 6, 12, 21A, 21B DMX channels
● 3 Operational Modes: DMX, Master/Slave, auto, sound activated
● Light Source: 3 x 12W RGBW 4 in 1
● Infinite Tilt rotation on each LED
● Infinite PAN rotation
● Power supply: 100 - 240Vac (50-60Hz)
To select the program function
Increase parameter
Reduce parameter
Enter submenu
13